bled-35w series budget series switch mode led drivers constant current with isolation black magic thermal advantage? plastic housing class 2: us/canada us only electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max) frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >0.90 @ full load, 120v; >0.80 @ full load, 277v inrush current: <25 a max @ 230 vac, cold start 25oc input current: 0.35 a max @ 120 vac; 0.18 a max @ 230 vac maximum power: 35w line regulation: 4% load regulation: 5% thd: <_ 20% @ full load leakage current: 300 a typical hold up time: half cycle start-up time: < 1.0 s output protection: over-voltage, over-current, short circuit (auto-recovery) environmental specifcations minimum starting temp: -30oc storage temperature: -40oc to +85oc maximum case temp. 90c humidity: 5% to 95% cooling: convection sound rating: class a vibration frequency: 5 to 55 hz/2g, 30 minutes mtbf: 580,000 hours @ full load, 40oc per mil-217f notice 2 impact resistance: 1g/s weight: 5.8 oz (165 g) constant current - product specifcations model number output current (ma 5%) output voltage range (vdc) max. output power (w) typical effciency bled35w-200-c0170 170 120-200 34 89 bled35w-100-c0360 360 60-100 36 89 bled35w-070-c0500 500 42-70 35 89 bled35w-063-c0550 550 38-63 35 88 bled35w-054-c0640 640 32-54 35 88 bled35w-048-c0700 700 29-48 34 87 bled35w-043-c0810 810 26-43 35 87 bled35w-036-c1000 1000 21-36 36 86 bled35w-030-c1200 1200 18-30 36 86 bled35w-024-c1500 1500 14-24 36 85 bled35w-022-c1600 1600 13-22 35 84 BLED35W-018-C2000 2000 10-18 36 84 bled35w-012-c3000 3000 7-12 36 83 e332160 rev 8-12-15 ? smaller footprint than our standard drivers ? total power: 35 watts ? input voltage: 100-277 vac ? indoor applications, ip64 ? ul dry or damp location rated ? 2 year warranty specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 2 dimensions - mm hot spot 5.91 min [ 150 min ] 5.91 min [ 150 min ] 0.390.04 [ 10.01 ] 0.390.04 [ 10.01 ] 3.74 [ 95 ] 0.20 [ 5 ] 0.20 [ 5 ] 1.87 [ 47.5 ] 1.61 [ 41 ] 0.39 [ 10 ] 0.55 [ 14 ] 0.55 [ 14 ] 0.16 [ 4 ] 0.98 [ 25 ] 0.79 [ 20 ] dc output red (+) blue (-) ac input white (n) black (l) wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. all wires are stranded with solder dipped ends. safety and emc compliance ul/cul ul8750, csa-c22.2 c e en61347 fcc, 47cfr part 15 class b en61000-3-2 en61000-3-3 class c 40 45 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature 0 60 90 105 120 75 15 30 45 135 50 55 60 65 70 75 80 85 90 bled35w series ul conditions of acceptability see website for additional information note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) disconnect power to led driver for at least 30 seconds before connecting or disconnecting driver output and led engine. this prevents potential arcing transients that can damage the engine and driver. see hot plugging in our driver application guide for more information. thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
